VDSL / xDSL Tester U332V

  • Testing: VDSL 2; READSL; ADSL2+; ADSL2; ADSL

  • Physical layer test: SNR chart, QLN map, channel Hlog

  • DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance)

  • VLAN, Vectoring

  • Modem emulation, simulating login to Internet

  • ISP login and IP Ping test (WAN PING Test, LAN PING Test)

  • All multi-protocol, PPPoE / PPPoA (LLC or VC-MUX)

  • Data memory

  • Compliant with all known DSLAMs

  • Full speed up to 150m

Copper & Fibre Multi Tester U600

  • VDSL2; READSL; ADSL2+; ADSL2; ADSL

  • Bits map, SNR, QLN map, channel Hlog

  • DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance)

  • VLAN, Vectoring

  • Modem emulation/simulating login to Internet

  • WAN PING Test, LAN PING Test

  • Cable tracing, check line sequence, landline telephone function

  • TDR with graphed trace (Range/resolution/accuracy: 4km/1m/±1%)

  • Optical power meter, VFL function

G.Fast Tester U332G

  • G.Fast, VDSL2 up to 35b, READSL, ADSL2+, ADSL2, ADSL

  • Physical layer test: SNR chart, QLN map, channel Hlog

  • Annex A or Annex B, Annex L, Annex M

  • DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance)

  • Modem emulation, ISP login & IP Ping test (WAN PING Test, LAN PING Test)

  • All multi-protocol, PPPoE / PPPoA (LLC or VC-MUX)

  • Data memory function

  • Compliant with all known DSLAMs

  • Full speed up to 300m

U327 V5.0 Telecom Test PDA

  • G.Fast, VDSL2 up to 35b, READSL, ADSL2+, ADSL2, ADSL

  • Physical layer test: SNR chart, QLN map, channel Hlog

  • Annex A or Annex B, Annex L, Annex M

  • DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance)

  • Modem emulation, ISP login & IP Ping test (WAN PING Test, LAN PING Test)

  • All multi-protocol, PPPoE / PPPoA (LLC or VC-MUX)

  • Data memory function

  • Compliant with all known DSLAMs

  • Cable tracing, check line sequence, landline telephone function

  • TDR with graphed trace (Range/resolution/accuracy: 4km/1m/±1%)

  • Optical power meter, VFL function

  • Full speed up to 300m

Handheld TDR Cable Fault Locator U612

  • Max range: 8km or 4km

  • Highest resolution: 1m

  • Accuracy: ±1% cable length

  • Power consumption: 1W

  • 200 × 90 × 43 mm / 0.42kg

  • Working temperature: -15℃ ~ +45℃

  • Storage temperature: -20℃ ~ +55℃

  • Comparison with TEK TelScout

Fluke Networks PRO3000 LAN Test Equipment of Tone Generation

PRO3000F50-KIT - PRO3000F Filtered Probe & Tone Generator, Kit, Analog Signal Tracing, Smartone, 50Hz

High Performance Wire & Cable Tracker U8200

  • Checking & mapping metal line of open, short, reverse, crossover

  • Finding the break point for 5E/6E cable, telephone line and display on the LCD

  • Testing cross-talk error on cable

  • Testing live cable

  • Memory function for calibration data

Buttphone U230F

  • Monitor, ISDN/ADSL identification

  • Hand free function

  • One Key override lockout function

  • Tone/pulse transfer function

  • High DC voltage indication, High AC voltage alarm

  • Low voltage self-checking, automatic power off

  • Memory key (10 groups of 18 digits)

  • Telephone functions (Dialing, Receiving, Redial)

  • Caller telephone number display

  • Telephone number storage and dial function

  • Mute function

  • AC & DC, oen line, earth insulation test

  • Check wire pairs

Fluke Networks TS 19 Telephone Test Set

Banana plugs with Line fast alligator clips, various test leads are available

High Performance F-set U206

  • Find the needed line among many disordered lines

  • Test cable type: network cable, twisted pair cable, telephone line, USB cable, coaxial cable

  • Line status test: to determine the open or short circuit status

  • Voltage polarity detection: test the positive and negative of DC voltage in the line

NBN GPON Buz Test kit U-BuzTest

Buz testing is required for each DPU affected if any of the following occurs after the workbook has been submitted;

• there is a change in the DFN or LFN (re-splice, patch, fibre path, etc.)

• more than one patch cable is disconnected at the exchange

The Buz testing requires of the following items:

• GPON ONT SFP (pre-registered with integration@nbnco.com.au)

SFP is not included and is supplied by your contracted delivery partner

• USB to SFP adaptor

• USB power source

• Fibre patch lead (ASC/ASC ~1m)

• OptiTap™ adaptor

Loop Resistance, Capacitance & Foreign Voltage Test Switch box

  • Measures the resistance between AB, A-to-Earth, B-to-Earth

  • Measures the capacitance between AB (by working with handheld DMM), to discover if there is any telephone connected.

  • Measure the Foreign Voltage of V(A-to-Earth), V(B-to-Earth)

  • Low cost