Optical Power Meter AOP110

  • Wide measurement range, high resolution of 0.01dB, accuracy better than ±0.2dB
  • Insertion loss test in dB
  • 2.5 mm UPP, or other connector adapters
  • 850/1300/1310/1490/1550/1625nm calibrated wavelengths
  • Data storage
  • Energy save mode
  • Reference value storage
  • 100 hours continues operation
  • 12 month warranty and 3-year recommended calibration interval

Optical Light Source AOS210

  • Very high stable Laser & LED light sources
  • Available auto wavelength with shifting Wave ID
  • 270, 1000, 2000Hz Tone
  • Low battery indicator
  • Energy save mode
  • 16 hours continues operation
  • 850/1300/1310/1490/1550/1625nm wavelengths, SM & MM available
  • Up to 3 optical ports, 6 wavelengths available for one light source
  • Wavelength enable & disable
  • Available output power adjustable

FTTx PON Power Meter EPN70.12

  • Conforming to ITU-T G.984 specifications
  • Display 1310 nm upstream & 1490/1550nm downstream
  • Burst mode for upstream 1310nm G.984 GPON upto 1.25Gb/s
  • Pass/ Warning/Fail LED indicators (10 threshold sets) display
  • For BPON/EPON/GPON in-line testing
  • Reference value set for each wave
  • Internal memory for 100 test data
  • User calibration mode
  • 36 hours battery life & Auto shut off
  • Large sunlight readable display & backlight
  • 12 month warranty and 1-year recommended calibration interval

MST Test Lead & Adapter

  • OptiTap-SC/APC test lead SM 3 meter
  • OptiTap-SC/APC hybrid adapter

Optical Fibre Identifier EFI-50

  • Screen: 1.44 inch TFT
  • Max. Input power: +20dBm
  • Sensitivity: -50dBm
  • Battery: AA/LR6 alkaline battery
  • Modulation identification: Yes
  • Applicable fibre: 0.25 / 0.9 / 2.0 / 3.0mm
  • VFL specifications: 1mW, with Glint function
  • OPM specifications: EFI-50T: -70 ~ +6dBm; EFI-50C: -50 ~ +26dBm
  • Dimension: 195 x 96 x 37mm
  • Weight: 140g

Optical Fibre Identifier UFI-300

  • Fast find fiber in a mass
  • Indicate Live or dark fibre
  • Indicate signal directions in fibre
  • For 0.25, 0.9, 2.0, 3.0mm, ribbon fibre
  • Detect 270Hz, 1kHz, 2kHz from laser source
  • One-year warranty and Three-year recommended calibration interval

Optical Fibre Identifier UFI-430

  • Detect optical signals without disrupting traffic based on non-destructive technology
  • Indicate the signal direction
  • Detect a variety of optical tones of 270Hz, 1kHz and 2kHz
  • Suitable for 0.25, 0.9, 2.0, 3.0mm, ribbon fibre, and bending insensitive fibre G.657.A and B
  • no need for the clamp blocks
  • Battery low indication
  • Powered by 2 units of 1.5V AA alkaline batteries

Optional:

  • Built in Visible Fault Locator 1mW or 10mW
  • Built in Optical Power Meter

Visual Fault Locator (VFL) UML20x-x

  • 650 ± 20nm
  • Output Power: 1 mW (3~5km); 10 mW (8~10km)
  • 2.5 mm or 1.25 mm Universal connector
  • Improved button switch for longer life time
  • Powered by 2x AA alkaline batteries
  • Replaceable internal ceramic sleeve
  • Comes extra ceramic sleeve

Optical Multi-meter (LTS)

  • Combine power meter, laser source and fault locator in one device
  • Can test the loss of the fiber
  • Data storage
  • Battery low indication
  • Energy save mode: about 10 minutes no operation
  • 16 hours continues operation

Optional:

  • Auto wavelength detect
  • Data transfer
  • 7 X 24 real-time monitor on PC

Optical Talk Set UOT600

  • Full-duplex communication with high quality conversation and very low background noise
  • Wide dynamic range: 45dB
  • Large dynamic distance: >120km
  • Long and short mode are for different distance
  • Keep pressing "call" can remind each other for talk
  • Battery low indication
  • 12 hours continues operation

Optical Variable Attenuator (Digital)

  • Low insertion loss and wide attenuation range, 60 dB or 80dB
  • Three wavelengths of 1310/1490/1550nm
  • Can offer different attenuation step of 0.1 dB, 1.0 dB, 10.0dB
  • Can save 10 tracks attenuation value
  • Can save current value as reference
  • Keep the value when shut down
  • Auto power off if battery low
  • Energy save mode: about 10 minutes no operation
  • 20 hours continues operation



CWDM, DWDM Channel Tester