optical fibre identifier EFI-50
max. input power: +20dBm
max. sensitivity: -50dBm
detect 270Hz, 1kHz, 2kHz from laser source
fibre: 0.25 / 0.9 / 2.0 / 3.0mm / ribbon
SM & MM (OM3, OM4, OM5)
no need for the clamp blocks
ambient light cover
VFL: 1mW, with Glint
OPM: T: -70 ~ +6dBm; C: -50 ~ +26dBm
195 x 96 x 37mm / 140g
detects bi-directional signal
screen: 1.44 inch TFT
optical fibre identifier AFI-430
max. input power: +20dBm
max. sensitivity: -50dBm
detect 270Hz, 1kHz, 2kHz from laser source
fibre: 0.25 / 0.9 / 2.0 / 3.0mm / ribbon
SM & MM (OM3, OM4, OM5)
no need for the clamp blocks
ambient light cover
230 x 45 x 45mm / 200g
detects bi-directional signal
live fibre line finder
find a live fibre from the fibre bundle
quick detection time
wavelength range: 900 ~ 1650nm
insertion loss is as low as 0.8dB
fibre types: G652D, G655, G657A1, G657A2
cable size: 0.9/1.6/2/3mm
built-in fibre protection mechanism
easy to use, no need to replace the chunks
support 270Hz, 1kHz, 2kHz signals
WiFi monitor
method-1:
apply the Receiver LFF-203 as a traditional Fibre Identifier, and switch to "Mode 1".
method-2:
apply the Receiver LFF-203 to the fibre cable you are interested in, presses the handle to turn on, press the Mode key to Mode2 mode
use a finger to flip the fibre
go through the fibre cable till the WiFi monitor 202S finds the cable under test. (The distance of the WiFi monitor 202S and the LFF-203 should be within 50m)