Smartmark 31 S wiremarking tag printer setup:

• Download installation disc from: https://www.idp-corp.com/index/bbs/board.php?bo_table=s4_1&cate=22

• Unzip folder if required

• Connect printer

• Load Ribbon into cassette (cassette is inside printer and is stamped to show which way around the ribbon goes)

• Ensure ribbon cogs are on the same side a printer cogs when installing ribbon

• Load tags into the Printer card feed (above button) oval goes on the front edge left side

• Install Print Driver only

• Open up excel sheet that Unitrek supplies

• Load your cable schedule into the A column from Row # 2 on the tab labelled Data File

• Click on Tab 70 x 10 x 4 – that’s your print tab, here you change the font size, bold & font type as required. I recommend font size 6.5 for the NBN work

• Click file – print – select printer & check print preview, should show a eftpos card sized sheet and your 4 first labels. If so, Select the page range (page 1-3 for testing purposes)

• Review print outputs