Site PROFILER™ E7000L Cable & Antenna Analyzer

Verify RF transmission settings, cable feedline and antenna systems settings at each cell site

Designed specifically for carriers, wireless professionals and contractors, the E7000 Series of Cable & Antenna Analyzers provides all necessary measurement functions and performance capabilities to accurately diagnose and verify the site’s cable & antenna systems and RF connectors, as well as basic fiber-feedline testing.

Key Benefits

  • Handheld, lightweight, field-proven, design for harsh environments and lighting conditions

  • 100+ wireless frequency bands and cable type presets for best ease of use

  • Reduced test time with dual simultaneous measurement display

  • Detect signal degradation and system performance over time with trace overlay

  • Instant Pass/Fail results

  • Manage your test setups & results with Measurement Center Software (MCS)

  • Intuitive touchscreen user interface for easier, faster measurements

Standard Configuration Includes

  • Cable and Antenna Analyzer, 2MHz to 4.4GHz

  • Internal E-Calibration Module, 2MHz to 4.4GHz

  • Internal RF Power Meter Module, 20MHz to 4.4GHz

Key Measurement Includes

  • Reflection - Return Loss or VSWR

  • Fault Location – DTF/RL or DTF/VSWR

  • Cable-loss

  • 1-Port Phase

  • Smith Chart

TM-196 Electromagnetic Radiation Meter

It's ideal for the measurement of:

  • RF power for transmitters

  • Electromagnetic wave field strength

  • Mobile phone (3G, 4G, 5G) base station antenna radiation power density

  • Spy camera, wireless bug finder

  • Wireless detection, installation for CW, TDMA, GSM, DECT and Wi-Fi)

  • Cellular/Cordless phone radiation safety level

  • Microwave oven leakage detection

  • Personal living environment EMF safety

  • Measurement range: 50mV/m to 11V/m

  • Frequency range: 10MHz~8GHz (accuracy: ±1dB at 2.45GHz)

  • Alarm function: Adjustable threshold with ON/OFF

  • Display: 4 1/2 digits maximum reading 19999

  • Units: mV/m, V/m, µA/m, mA/m, µW/m², mW/m²,µW/cm²

  • Display resolution: 0.1 mV/m, 0.01V/m, 0.1µA/m, 0.001 mA/m, 0.001µW/m², 0.01mW/m², 0.001µW/cm²

  • Data memory: 200 data sets

  • Calibration factor: the setting range is 0.10 to 5

  • Sampling 3 times/second

  • Battery life: Approx. 3hours

  • Dimension: main instrument 370x80x80mm (LxWxH)

Multifunction QAM Analyzer DS2460Q

  • D3.1 ready (1.2 GHz frequency range), Up to 1.22GHz downstream, 120MHz upstream

  • Multiple channel plans with learning mode

  • (Downstream) Power, MER, BER measurement (NBN job essential)

  • Return Path (Upstream) & Forward spectrum scan

  • One-button “MiniScan” to test the selected channels with Power, MER, Pre- & Post-BER

  • Pass/Fail limit test functions AUTO storage

  • Pre and Post BER analysis

  • BER, ES, SES, Corrected/Uncorrected bit error

  • Tilt measurements display (12 channels)

  • AC-DC voltage measurements including HUM

  • Measurement data storage, Management Toolbox PC software, Life time software upgrade

Magnavox / Philips Return Seizure Test Port Probe 2101123

Does NOT pass power

ST-5150 DVB-S2/T2/C HD Satellite TV Handheld Signal Meter

  • Transmission standards: DVB-S2/S, DVB-T/T2, DVB-C

  • Li-Ion battery: 7.4V/2600mAh

  • Adapter: 100~240VAC, 50/60Hz

  • Power consumption: max 10W

  • Weight / size: 1kg / (W x D x H) 17 x 12 x 4cm

Satellite input/Demodulation:

  • Connector type: F type

  • Input frequency: 950 to 2150 MHz

  • Signal input level: -65 to -25 dBm

  • Demodulation type: 5V, 12V/24V IMax 100mA

  • Band switch control: 22 KHz

  • LNB supply: 13V/18V, IMax 400mA

  • Sampling rate: 2<Rs<45Mband (SCPC/MCPC)

DVB-T/T2/C input/Demodulation:

  • Connector type: F type

  • Input frequency: 48 to 862 MHz

  • Signal input level: -79.5 dBm (max)

  • ANT supply: 13V/18V, IMax 400mA

Data port:

  • Connector: USB2.0

  • System: NTFS, FAT32, FAT16

  • File: wma, mp3, mp4, avi, jpg, jpeg,, bmp, imgt

Long Distance Cable Finder U820

  • Up to ~10km in length

  • Adjustable sensitivity for coarse and fine searching

  • AC interference rejection

  • Tone trace live cable with alligator clip up to AC400V high voltage

  • Trace any cable that contains metal rod or wire

Searching the coax cable

Step-1: Clip the Transmitter on the coax cable PVC jacket

Step-2: Hearing the Receiver to find the cable

Sensitivity on both Transmitter and Receiver can be adjusted, and the Receiver signal level indicator can help to identify the cable under searching