Hand-held Digital Multimeter VC97

  • Overvoltage category (CAT. III 1000V, CAT. IV 600V)

  • Voltage, current, resistance, capacitance, Hz, tempearture etc.

  • Non-contact volt detector (NCV)

DC: 400mV ~ 1000V

AC: 400mV ~ 750V

DC: 400μA ~ /20A

AC: 400μA ~ 20A

Resistance: 400Ω ~ 40MΩ

Capacitance: 4nF ~ 200μF

Frequency: 10Hz ~ 30MHz

Temperature: -40~1000°C

Diode, Transistor Test

Continuity Buzzer

Sampling Rate: 3 times/s


Mini VC868 Digital Multimeter

  • Non-contact volt detector (NCV)

  • Display count:6000

  • DC: 6V ~ 1000V/ 6A ~ 10A

  • AC: 6V ~ 750V / 6A ~ 10A

  • Resistance: 4Ω ~ 60MΩ

  • Capacitance: 10nF ~ 60mF

  • Backlight & Diode test

  • True-RMS

UNI-T UT210E Digital Clamp Meter

  • Display Count: 2000

  • Auto Range

  • Jaw Capacity: 17mm

  • True-RMS, Data Hold, Zero Mode

  • Diode: ~3.0V, V.F.C.

  • Non-contact volt detector (NCV)

  • LCD Backlight, Auto Power Off

  • Continuity Buzzer

  • Low Battery Indication: ≤2.5V

  • Input Protection

  • Input Impedance for DCV: ≥10MΩ

TES-32 A battery capacity tester

Designed for measuring the internal impedance, open circuit voltage of the secondary battery including nickel-metal hydride battery (NiMH), Nickel Cadmium Battery (NiCd) batteries, lithium ion battery (Li-ion), alkaline battery and lead acid battery. AC four terminals method to measure the internal impedance: by eliminating lead Impedance: and contact impedance: to get the accurate results. Dual display to show the internal impedance: and voltage of the battery simultaneously. It has 99 sets of composite Comparator function, which can be set at Impedance: and voltage values to get the reliable detection of battery deterioration.

  • Accessories: Instruction manual, batteries, test probe, software for USB-RS232 cable.

  • Dimensions/Weight: Approx. 250 (L) × 100 (W) x 45 (H) mm/approx. 500 g including batteries.

  • Resistance:
    Ranges: 40 MΩ, 400 MΩ, Ω, 40Ω
    Resolution: 10 MΩ, 100 MΩ 1 MΩ, 10 MΩ
    Accuracy: ± (1% reading + 10digits)

  • Measurement:
    Current: 37.5mA, 3.75ma, 375mA, 37.5mA
    Frequency: 1kHz
    Accuracy: ± 10%

  • Voltage:
    Measurement: 4 V, 40 V
    Resolution: 1mV, 10mV
    Accuracy: ± (0.1% rdg ± 6digits)
    * Open circuit voltage: 3.5 Vpp MAX

  • Manual data memory: 500 data sets, continuous data memory: 9600 data sets (only use PC download)

  • Power Supply or AC adaptor: Six Size AAA 1.5 V

PVC electrical insulation tape

black, wear-resistant, flame retardant,

waterproof, lead free

9M x 18MM x 0.13MM

voltage rating 600V

Professional wire stripper

  • Length / width: 175 / 125mm

  • 5 holes for wire size:

  • 1.0-1.6--2.0-2.6-3.2mm

Universal digital multimeter test lead 1000V 10A

Rosin Solder Wire SWR-0.8-2, high purity, 0.8mm/2m