Fusion splicer electrode holder service

The image shows a electrode holder underside, the before and the after cleaning, which improves the arc, strength the splice point, with low splice loss.

Covering LED hood cervice

The blow back of silica into hood  of the covering LED, which is used for formalising, by cleaning it, will improve the loss estimation.

Thermal stripper service

Ribbon splicer fibre pad and v-grrove

From left to tight, picture 1 shows the blue v-grooves clearly between the fibre pads, which leads to dirt / silica build-up, see picture 2.

The picture 3 shows the left pad now in correct position.

Fusion splicer dust on CCD camera

Fitel fusion splicer: modify program parameters

Sumitomo T-39 fusion splicer